RL-HSB-001 · Sensors · Hall Sensor Breakout
Mechanical drawing
Board envelope, mounting references, connector envelope, and magnetic origin placement notes.
Published May 4, 2026Updated May 8, 2026Reading time ~12 min
01Board dimensions#
The PCB is a 1.6 mm FR-4 board with HASL finish. Dimensions are in millimetres, with the sensor centre referenced as the magnetic origin for placement calculations.
02Drawing#
| Length | 14.5 mm |
| Width | 11.5 mm |
| Board profile | 2.77 mm |
| PCB thickness | 1.6 mm |
| Net weight | 5 g |
| Connector | 3x 2.54 mm header |
03Placement reference#
Keep the sensing IC location, not the connector edge, as the mechanical reference when placing magnets or moving linkages. This keeps calibration repeatable when board orientation changes between prototypes.